Modular drawers

Spear parts and small tools drawers with modular boxes. They can be easily stacked together with a little clips (you’ll need 4 of them). With the separators for the Modular drawers box, you can use the narrow drawers. Just slide in 3 in a row and you’re done.

Dimensions are chosen so, that relatively large tools/parts can be stored, but you still can print it on the Prusa MINI/+ printers.

The idea and intentions was to make a simple, practical and printing-friendly model, easy to putting it together, but still having a nice look (design always matter). 😊

No supports needed, but brim is highly recommended for vertically printed parts.

Update 10.02.2022:

All staff in one place.

New boxes.

Update 11.02.0222

Four new large drawers.

P.S.:

Suggestions, comments and prints sharing are welcome!

👍🏻

👉🏻 ❤️