Rainbow Clouds

I wanted to get my feet a little wet with 3d modelling and figured I should find a simple project to start with. I liked the original design by Tyros, but I wanted to add that extra arc to have the 7 colors in the rainbow, and here's the result, redesigned.

Hope you guys enjoy, and let me know if you want me to make any changes.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2mm

Infill:

Notes:

I recommend printing the cloud lying down and with support for the cutout.

If you print it standing up you might get a faster print, and you won't need supports, but the aesthetics will suffer a bit at the bottom because of the overhang.