Holder for scale Oneblade QP2520/20R1 Phillips

I'll rework this project in a little more detail this summer with additions for different Oneblades (which will allow for a smaller fanny pack or more portable accessories). Waiting for CAD models or measurements for modeling tools...
The QP-1924 series and similar sizes in particular (KarotBlade in process!)

Two versions only QP2520/20R1:

• BananaBlade Strong: 

Built-in magnets, accessory slots.

• BananaBlade Light (only .step):

No built-in magnets, no accessory slots.

A Mini BananaBlade may be possible for both accessories and the Oneblade.

To open, see the top and bottom of the BananaBlade.

You have to glue them! ⬆⬇

Why are neodymium magnets so strong? Because there are no hinges and also because I had too many…

The .step file is provided for modification.

The lettering is as you wish; these are for informational purposes only, not for personal use, as the measurements are in my head!

For printing… And it's up to you to figure it out! 🫣 Thank you for getting back to me!

You can paint it to add details! I hesitated to add hollows for decorations (streaks or black/brown spots) for more realism.

Since I no longer have a working 3D printer (lack of time and motivation!), I couldn't actually check the measurements. I use Slicer and basic CAD software on Android, so please be careful!

The supports should definitely not be used if laid flat on the opening side.

I am participating in the PhillipsXPrintables contest, feel free to use the tool (Philips Oneblade Modeling Tool) and check out the other creations.

Original by Dewalt Banana.

Thank you!