Samsung SWA-9200S Longer adjustable speaker wall mount holder (keyhole mount)

This is a remix of FredRaket's Pioneer DJ speaker wall mount, adapted specifically for Samsung SWA-9200S rear speakers or any other speaker with a keyhole mount.

The mount consists of two pivoting joints that allow you to adjust both the tilt and rotation of the speaker for optimal sound direction. The design is sturdy and compact, and it's well-suited for use with lightweight surround speakers.

🛠 What you will need (in addition to the printed parts):

2x M6 bolts (length: 30–40 mm) + nuts or wing nuts (for joints)

1x screw to attach speaker (fits into keyhole mount)

4x screws and wall plugs to mount the base to a wall

Optionally: washers for smoother movement in joints

The holes in the base are designed to be used with standard wall plugs and screws for solid anchoring. The speaker attaches via a keyhole cutout slot on the top plate, which fits Samsung SWA-9200S perfectly.

🖨 Printing tips:

Recommended layer height: 0.2 mm

Infill: 50–100% (for durability)

Material: PETG or stronger (e.g. ASA, ABS, CF-PLA)

Note: Always make sure the screws are tightened properly and test the mount before final use to ensure safety.