JBL Charge 2 speaker SKADIS hanger + phone tray

I needed a mount for my JBL Charge 2 speaker to attach it to the IKEA SKÅDIS board. Inspired by the model from @Smoluch, I adapted it to fit my needs.
You can print just the speaker mount, or additionally print a tray—for example, for a phone—which is compatible with the mount. The tray includes a cutout to allow speaker control.

For the whole set you’ll need:

• to PRINT
  • 2x JBL_SKADIS_HANGER.stl // supports needed
  • 1x TRAY.stl
  • 1x TRAY_MOUNT.stl
• to BUY
  • 4x M2x10 hex screws
  • 4x M2 heat-set inserts.

I used PETG material for printing, with 20% infill for the mounts and 10% infill for the tray.

Designed to be mounted on the IKEA SKÅDIS board