UAP V4 Toolhead
This is a toolhead I'm working on to replace the fibersteam using it's x carriage and modified UFO ducts from rocksalt
12
53
0
419
updated
May 27, 2025
Description
PDFCpap toolhead inspired by @DK on discord using the fibersteam x carriage or my custom sheetmetal sandwich x carriage, goliath hotend, beacon rev H and bmg extruder with a smooth bearing idler. Smooth idler and front bmg bearings are MR115.
Use at your own risk and have fun!
Supports are required and will need to be well tuned. I'd highly recommend a fiber filled filament to make the supports easier to remove. I've used 0.14mm top z distance, 4 interface layers and 0mm of top interface spacing with default tree supports.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Based around the fibersteam x carriage for goliath and ridga with modified smaller valves from the UFO ducts.
