Sovol SV08 Swivel Umbilical Drag Chain

I am completely new to this environment and 3D printing, so hopefully I have uploaded and described everything correctly. If not, please feel free to contact me.

I used 23 cable chains and chain clips 

The Base Connector uses the SV08 original screws for mounting.

The Tool Head Adaptor replaces the original cable clamp and mounts with the original screws.

All other parts are designed to connect to each other.

I have provided photos as examples of the assembly process listed below.

1. I first connected the original lower drag chain to the bottom of the Drag Chain Base Connector using the original 3 screws. Then attach the Drag Chain Base Connector to the back rail, also using the original screw.
2. Insert  the umbilical into the Drag Chain Base Connector and then slide in the Cable Cover.
3. Snap on the Base Chain Adapter to the Drag Chain Base Connector.
4. Sap on the Base Chain Adapter Sleeve to the Base Chain Adapter.
5. Slide on the Sleeve Cap, but DO NOT snap together until the Cable Chain is inserted between the Base Chain Adapter Sleeve and Sleeve Cap.
6. Attach one Cable Chain to the Tool Head Drag Chain Adapter and then remove the original umbilical tool head clamp. Use the original screws to mount the Tool Head Drag Chain Adapter to the tool head.
7. Now you can connect all of the Drag Chains, umbilical, and Chain Clips for the final assembly. 

I used PETG for this project and I don’t recommend PLA.