Zyliss chopper base

After many years of constant use the plastic base of our trusty Zyliss chopper has many cracks so I designed this replacement.

Be aware that this part will withstand constant impacts, so my advice is to use at least 3 perimeters and a high infill ratio, even 100%.

Is VERY IMPORTANT to use food safe 3D printing filaments like PLA, PP, co-polyester, PET, PET-G, HIPS, or nylon-6.

If you plan to run the part through the dishwasher be careful because some plastics (like PET, nylon and PLA) soften and distort around 60–70 °C.