Terrainlock, highly customizable modular terrain.

Terrainlock

Modular terrains aren't uncommon. But something as expansive, customizable and capable of being molded into whatever you want doesn't exist. Until now. I made this to be essentially the ultimate terrain creator. To be more capable than anything out there. It also has adapters for action base arms and Chogokin stands to allow for more expressive poses. 

Features

-Made to printable on even the smallest printers like the Voron v0.2.

-No supports required

-Compatible with 3mm and 7mm pegs for model kit arms. 

New modules, connectors, tiles, and more:

https://ko-fi.com/armoredsoul

-Note, any updates and new Terrainlock designs and parts will also be uploaded to Ko-Fi.

Recommended Materials and print settings:

PETG (recommended, but not required. PLA will work fine)

2 walls

5% gyroid infill

Note: 

-The Pry Tool makes adjusting the tiles and terrain easier. 

-Recommended to print out first to test out tolerances:

• Ratchet Core 1.5x Long
• 0 Degree Side Connector
• AC 45 degrees Single

-Smaller printers like the A1 Mini or Voron 0.2 will not be able to use 6x sized parts. 4x and smaller parts will work fine though.

Updates:

-June 3, 2025: Screw Core Modules + Screw Core Support Pillars released on Ko-Fi.

-May 30, 2025: Locking Core Modules, more Terrainlock connectors, Custom Tiles: Stars released. Can all be found on Ko-Fi.