Anker PowerPort 6 Mount

I made this mount to allow my Anker PowerPort to be cleanly mounted on the wall.  It's meant to be printed upright as it's modeled, no supports are needed. 

The mount has roughly 1mm of wiggle room all the way around so this wouldn't work as a fiction fit mount if you wanted to mount it anyway other than upright. I left it a bit loose so that the unit can be easily removed and reinstalled without scratching it up. 

There is a cutout in the bottom for the power cord. The top is completely open so there is no interference with the usb slots.

The screw holes are set up for any standard drywall or construction screws.