Armour Clash Movement Trays (with handles)

This is a set of movement trays (with handles) for Warcradle's Armoured Clash.

Each tray has a front section marked with an ‘O’ for the Officer model (base). This has been designed as the optimum position for the Offier model which aligns with the rule of the officer model should be on the front flank and as close to the centre as possible

There is a maximum of 24 models allowed per unit.

You can print whatever trays you need, rather than printing them all.

I have catered for as many versions as possible that are used normally within the game.

I have catered for as many versions as possible that are used normally within the game.

The file codes are as follows:

S=Skirmish (Basic Unit)

B=Battle (Full Strength Unit)

C=Cataclysm (Reinforced Unit)

SB=For both Skirmish & Battle

BC=For both Battle & Cataclysm

H=Handles

The handles at the rear of each tray are to help move the tray for those less able to move them normally.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I (have not) printed these on my Ankermake M5 printer with Ankermake slicer Studio (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 250mm/s (Initial layer @ 50mm/s)

Nozzle Temperature: 230 Degrees (Initial layer @ 230 Degrees) 

Bed Temperature: 65 Degrees (Initial layer @ 75 Degrees)

Infill: 20%

Supports: No

Skirt: No / Optional

Brim: Yes / Optional

Raft: No / Optional

Enjoy.

                                              https://www.buymeacoffee.com/tigertone