Insta360 Link 2 Privacy Cover

Description

This 3D-printed accessory is a custom-designed privacy cover for the Insta360 Link 2 webcam. It securely fits over the camera lens, allowing users to physically block the view when the camera is not in use—ideal for anyone who values privacy and security.

The cover is easy to attach and remove, with no need for adhesive or permanent modifications. The inside is lined with soft foam to protect the lens from scratches, ensuring both safety and convenience.

Instruction

1. 3D Printing the Model
2. Attaching the Foam Padding

Measurement

Outside

• Width         - 33.6 x 39.8 mm
• Height        - 39.6 mm

Print instructions

Recommended Print Settings

• Infill: 15 %
• Layer height: 0,20 mm
• Supports: No

Print Time

• Together: approx. 1:36 (hr:min)

Required hardware

• Foam - tesamoll STANDARD I-Profil - Schaumstoffdichtung (Amazon-DE - https://amzn.to/4dy98X6)
• Insta360 Link 2 (Amazon-DE - https://amzn.to/43eBVMX)

Tools

• -

Tested Printer

• Prusa i3 MK3S+ Drucker

Tested Filament

• Prusament PETG Prusa Orange

Updates

-

If you have any questions or improvements/suggestions do not hesitate to contact me!

If you like what you see, consider following me to support my work - more to come -

AUGU5TO | PrusaPrinters

Affiliate links: As an Amazon Associate I earn from qualifying purchases. By buying through any of the links above I will earn commission at no extra cost to you. Every product in the links, I bought and tested by myself.