(Tokyo Marui) G17 mount rail

This airsoft gun can be assembled with a dedicated optical sight, but I have a generic one and wanted to put it on, so I made this one.
The higher position of the optical sight may cause it to deviate from the adjustment range.
Once this is attached, the original rail cannot be used.

I prepared three variations.
V1: Basic model
V2: Finger hold model
V3: Slit model

About Printing
PLA, PETG, ASA, etc. are good materials.
Support material: required (organic) 
Pitch: 0.2mm 
Nozzle: 0.4mm 
Wall: 3 
Infill: 30% 
Brim: not required 
Printing time: about 2 hours

What you need to prepare separately 
Bolts: M3*35 
Nuts: M3 
Optical Sight: 20mm rail compatible

It was made to fit an airsoft gun and may not be assembled on a real gun.
Please play it safe first.

東京マルイ G17 Gen5 MOS ガスブローバック No.108 Glock