Zonai Small Battery

Finally finished! Please forgive my poor plastic forming and painting, as I'm still learning.

So this is the Small Zonai Battery from Tears of the Kingdom.

I originally started with the model from the game files but remeshing and redesigned parts to make this a great piece for display or cosplay!

You have two options with printing that I've set up, but you can always adjust it to fit your personal preferences.

You can print the Zonai Battery Full if you just want to print a solid piece or have a Multi Material printer. For this you will also have to print 1x Top Band and 2x Bottom Band.

I used the bottom of a Starbucks venti cup and a heat gun to get the right roundness in the banding and then trimmed the “legs” right before I glued it on. You will also need a clear piece of plastic either stretched or formed to your liking.

If you don't have a MM printer or just want to adjust pieces to your preference, I've also attached each individual piece.

If you have any questions, let me know and Ill do my best to assist!

Happy Printing!