Chameleon Air Ship

Chameleon Air Ship from Skies of Arcadia video game.

Update 1/9/2020, I added a stand to the model files.

Print instructions

Material: PLA

Layer height: 0.20 mm

Infill: 20%

Rafts: NO

Supports: YES / NO on the stand

The model is split in half so you just need to print the 2 half's then the pins, use the pins to align the model when gluing it together.

also be careful when removing the support material around the cannons and such as they are small parts, I did break one off in my print but I was able to glue it on no problem.