Adjustable table for fiber laser

Printed without support. PETG / layer 0.2 / perimeter 4x / infill grid 15%

This linear guide was designed for a magnetic business card holder.
https://www.printables.com/model/676042-maglev-card-holder

For linear guide use welding wire diameter 2.4mm aluminum

3x M3S square nut
3x M3x60
3x M3x5 allen screw
3x 3mm guides ball (glued with superglue to allen screws M3x5)
1x pin 3x14mm
1x M6 lock nut
1x M6x18 allen screw

For lapping linear guides use the sharp edge of the welding wire 2,4mm
Cut the mounting holes using an M6 tap
I used 0.5mm Teflon foil between the center parts X and Y

More models for laser:
https://www.printables.com/@DeeDee_245307/collections/1107838