CR-18P 2024 Rushmore (1810416 HobbtPlus) Modding parts

A couple of parts to replace the battery tray and RX/ESC tray and move them lower down. Also includes braces to replace the stock trays to save some weight and space. You can use the included hardware, although for the battery and RX/ESC mount it might be worth to use a longer screw. The hardware seems to be M1.6 - if you have, I'd use M1.6x7mm screws for the trays.

Parts are printed from PET-G, but really any material should be fine, they are not under a lot of stress or heat.

Each part only needs to be printed 1 time.

Bonus

Also includes parts for a case and camera mount - if you are interested in driving your crawler long distance in FPV mode, hit me up - we are still looking for Beta Testers for this project and this printable is a bit of a “soft launch” for this.

Cam rails are intended to be used with a Pi Cam v3, you have to print both cam rail parts two times.