"The Gliding P" Alternative Bridge Core

I changed the screw holes to work with another bridge I wanted to use that is on amazon. I also included a blank stl of the core for people wanting to edit it. 

The core with the changes has a negative of the bridge holes and ferrules I used so you have to open it in a slicer to see it. Also the Negative shows positive in the preview but when you download the .3mf it will be correct as a negative.

You still need to download the original file from Shane Wheat Industries for the other parts of the body. Original files: https://www.printables.com/model/891725-the-gliding-p-electric-guitar

This is only an Alternative Center Body Core for a different bridge. (Link Below)

I printed with settings of:
20% infill - 3D Honeycomb or Gyroid 

4 layers of Perimeters 

Supports only on Plate - Organic and 30% over hangs.

Here are the links to the parts:

Hard Tail Fixed bridge: https://www.amazon.com/dp/B07HCGDZ9W?ref=ppx_yo2ov_dt_b_fed_asin_title
Ferrules: https://www.amazon.com/dp/B01LXBV5V3?ref=ppx_yo2ov_dt_b_fed_asin_title

Steel Strength Rods: https://www.amazon.com/dp/B0BKGP4TC3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Threaded Inserts: https://www.amazon.com/dp/B0DFWVW6NW?ref=ppx_yo2ov_dt_b_fed_asin_title

I changed the screw holes to work with another bridge I wanted to use that is on amazon. I also included a blank stl of the core for people wanting to edit it. 

The core with the changes has a negative of the bridge holes and ferrules I used so you have to open it in a slicer to see it.