FAB365 Venator Wall Mount – Floating Display Bracket

Showcase the beautifully engineered FAB365 Venator-class Star Destroyer the way it deserves. Floating effortlessly in mid-air.

This wall mount system is purpose-built for Fab365's Venator models, offering a clean, nearly invisible display solution. 

The result is a stunning floating effect that makes your Venator appear to hover against the wall. Perfect for a clean, minimalist display in your workshop, office, or collection space.

Printing Instructions:

• Printed : 0.2 Layer height.
• Infill: 20% (old design 30%)
• Walls/Perimeters: 3 walls for increased load-bearing strength

Mounting Instructions:

• You can either mount it using the mounting holes on the back, or print the VHB versions and mount it with VHB tape.
• Mounting Spacing: Position brackets approximately 10 cm apart for balanced support

Update – Improved design

After working on various other models and ideas, I learned a lot and decided to revisit and improve the original bracket design.

What’s New in Version 2:

• Screw Mounting Slots: The brackets now include slots for screws to provide a stronger, more permanent mount.
• Segmented Design for Strength: The model is now split into flat-oriented pieces, which improves print strength and reduces sag.
• Modular Press-Fit Peg: The peg is now a separate press-fit piece.
• VHB-Friendly Version: I’ve also included a version of the new brackets optimized for VHB tape, for those who prefer a no-drill mounting solution.
• Original Model Included: The original design is still available for those who don’t mind the older setup or had success with it.

You’re no longer locked into a single orientation. You can rotate or mirror the peg and bracket to suit your setup.

While it's designed as a press-fit, I chose to glue mine for extra peace of mind.

Happy printing and may the Force be with you!