MotorHome Water Filler Cap

Made from TPU (95 shore). This is an attachment to allow a fill pipe to be securely and reliably attached to a MoHo water tank fill point. It uses the same latch points as the normal water tank cap. Clock-wise twist secures, counter-clockwise to remove.

Most importantly, it stops the need to have to hold the water feed pipe in place while filling and removes the temptation to ram the water pipe down the feed pipe until hit holds in place, possible causing damage over time to the MoHo water tank / pipe.

BGcode and STL supplied. The securing lugs require support. I used support everywhere, but you'll find that the lugs are the only points selected