V-Core 4 Umbilical Frame Mount (Idex)
Umbilical cable frame mount for V-Core 4 Idex machines. Replaces the stock RatRig umbilical frame mount.
11
79
0
178
updated
May 22, 2025
Description
PDFThis model replaces the stock RatRig umbilical frame mount with one that is more suitable for Idex machines.
Hardware Required
- Heat Insert - Brass - M3x4.6x4 (Qty: 2)
- Set Screw M3 x 5mm (Qty: 2)
- T-Nut - Drop In for 3030 - M6 (Qty: 2)
- Cap Head Screw M6x12 (Qty: 2)
You will be able to re-use the set screw, t-nuts and M6 scews from the original frame mount.
Printing
Print as per RatRig recommendations. I printed in green ABS-GF.
Installation
The installation is the same as the original, except now there are separate holes for the piano wire guide from each toolhead. Use the set screws to hold the piano wire in place.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Widened the design to allow easy fitting of two toolhead umbilical cables.