Elegoo Centauri Carbon 10-Degree Door Holder

This door holder is specifically designed for the Elegoo Centauri Carbon enclosed 3D printer. It allows you to securely prop the front door open at a fixed 10-degree angle.

Purpose

• Provides slight ventilation for the print chamber when needed.
• Helps reduce stress on the door hinges caused by vibrations during printing, by keeping the door slightly ajar and stable.
• Prevents the door from swinging fully open or closed unintentionally.

Features

• Custom-designed for a snug fit on the Elegoo Centauri Carbon.
• Maintains a consistent 10-degree opening.
• Easy to attach and remove.

Printing Recommendations

• Material: This model has been tested with TPU 64D. A somewhat flexible material is recommended for best performance. Other materials like PLA, PETG, or ABS might work, but flexibility is preferred. If you print this with other materials, please share your experience in the comments!
• Layer Height: User preference. The model is not complex.
• Infill: User preference. The model is not complex.
• Supports: This model is designed to be printed without supports.

Installation Notes & Disclaimer:

• Important: Depending on the installation position, this holder may interfere with the camera cable. The recommended installation location is shown in the 3rd image (indicated by a red box).
• Warning: Forcing the holder into other positions may damage the camera cable. Please be careful during installation.
• The creator is not responsible for any damage that may occur to your printer or its components as a result of installing or using this part. Use at your own risk.

Simply print the holder and slide it onto the recommended part of your Elegoo Centauri Carbon's front door frame to use.

Inspired by Bambu Lab Door Holder V2 X1/P1S by devilinside