Wera Kraftform XXL3 Multiboard mount

Was lookng around various model sites to find a holder for the Wera Kraftform XXL3 kit of drivers, without any luck, so I created my own.  The idea was to keep the holder as  compact as possible and flush to the Multiboard.  The mount is 225mm wide and 25mm tall, keeping it within the grid of the Multiboard, so you can mount other things right up next to it, saving space on the wall.

To mount it you will need:
2 x Multiconnect "Flush Big, Coin Slot, Foldable" 
Available here

There are slots in the back for more Multiconnect mounts, but 2 is more than enough to handle all the drivers.

Printed with PLA and standard Multiboard print settings.

Used the Multiconnect “negative” files to create necessary attachment slots for Multiconnect bolts.