Beauty Case

Beauty case for mascara, lipstick and other things.

• no support, 5% rectilinear infill with modifier only until top of bottom, 2-3 walls, 0.1-0.2mm layer height, 0.4mm nozzle, 3/4 bottom/top shells
• see FreeCad project file on GitHub: beauty-case.FCStd

Dont't be discouraged by the visible layer lines and ringing! It was my first printer on PU wheels without tuning parts etc…

Use PLA+ (see the fuchsia one in the pictures) which is slightly stronger and can be better polished. Take sand paper from 200 to 2000 and polish by hand on a glass plane with enough water. Don't waste time in coating or rotary sander. Better invest in polishing. In the end give it a thin patina with a bees wax for polishing wood. Alternatively try with fuzzy skin.