Asometech 140W PD PSU 10" Rack Mount

Additional parts:

• 4x M3 heat insert, 4.2mm outer diameter
• 4x M3 bolt, length anywhere between 10mm and 30mm.

Assembly:

1. Install the heat inserts in the front part's back side cavities.
2. Slide the device into the front part, from the back.
3. Slide the rear part onto the rear side of the device.
4. Secure the rear and front parts with M3 bolts. Carefully tighten just enough to hold the parts together snugly - it's relatively easy to overtighten inserts in soft plastic.
5. Install into your 10" rack of choice. 

This is a custom design which I made for a friend, who kindly agreed to share this free of charge, as a creative commons work within the public domain. Enjoy!

Here's the Onshape design in case you'd like to use reference/modify it: https://cad.onshape.com/documents/5d5dd0f3331ac49bf5cf37f4/w/e39c9f24dd5e6c8a9b3d5ded/e/347618552d97e0dd61fb5b7a