Project: odin.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 177.13x213.48mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA creality black Transmission Distance: 0.3
#707070 PLA sunlu grey Transmission Distance: 2.6
#9c9c9c PLA sunlu grey silver Transmission Distance: 3.2
#ffffff PLA creality white Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with black
At layer #10 (0.88mm) swap to grey
At layer #17 (1.44mm) swap to grey silver
At layer #22 (1.84mm) swap to white for the rest.
The author marked this model as their own original creation.