This is a leveling tool to be used with the original tamper of Cafelat Robot espresso machine.
I've measured my tamper and the handle diameter is 26.3mm. I believe all tampers have the same dimensions, but you can check yours to make sure.
I don't have a 3D printer myself, so I ordered the part to a local printing service. Because of that, I don't have much details about printing settings, but the tool is really simple. It might fit snug at first, but if you force it up and down multiple times, it will fit better, with no play at all.
How it works
Licensing
A note to commercial printers: this tool is meant to be affordable and accessible for all. I give permission to print and sell this as long as the following conditions are met:
1. Any posting should include a link to this design.
2. Total cost may not exceed 9 USD. Total costs exclude shipping and handling.
Donate
If it works for you and if you want to, you can buy me a coffee! :P
https://ko-fi.com/santiagoluz
Printing Settings
Supports: No
Resolution: 0.2mm
Infill: 30% (but I think even 10% would be fine)
The author marked this model as their own original creation.
