VFD Aime Reader Style Case for AIC Pico

A case design for whowechina's AIC Pico, based off the real VFD Aime reader assembly. (outer measurements should be fairly accurate but missing mounting)

NOTE THAT THIS DESIGN IS UNTESTED - PRINT AT YOUR OWN RISK

The midframe is designed to fit the PN532 and is mounted with 10x M2*8mm screws.

ACRYLIC PARTS

• 1mm clear acrylic - acrylic cover.dxf
• 3mm light guide OR frosted acrylic - light guide.dxf
• 1mm black acrylic - dummy vfd.dxf

ADDITIONAL NOTES/PARTS

• an ARGB LED strip that's less wide then 14mm and 100mm in length  
• mount the microcontroller and NFC module with glue or tape (lmao)
• the plate and acrylic cover needs to be glued on the edges  
• printed marquee 112x120mm (glossy paper prefered) Download 

All the credit for the firmware and wiring goes to whowechina so go check out their Github repo:

whowechina/aic_pico: AIC Carder Reader (github.com)

If you have any questions, feel free to contact me on discord: @lumiplus

different case