With this shovel, you can dig small trenches to channel the water out the trails. If you need to dig into gravel, use the opposite side. It is intented to have a rough finish with support separation to add grip. Easy to cary on the side of you hipbag. You can strap it under the seat, it accept to remove material from the handle. I strap in under the downtube of my DH bike.
I printed it in many angles and it makes no difference if you don't rush the print.
I prefer PETG because it will tear appart slowly instead of explosing like ASA.
You can add you logo with a sofware like 3D builder. Please print them, give them or sell them, as long as the money goes back to Volunteer crew.
Good luck to break under intended use ;)
The author marked this model as their own original creation.