Wine bottle cork (antique miniature) second batch

This is the second batch of a series of corks for wine bottles or other glass bottles with various miniatures of antique art serving as a handle. the first 4 can be found here: https://www.printables.com/model/1249904-wine-bottle-cork-antique-miniature I published an "instructable" to explain the historical context off all those models, you may want to take a look here: https://www.instructables.com/3D-Printing-Wine-Cork-to-Enjoy-World-Wide-Ancient-/

The miniatures are based on real artworks digitalized by photogrammetry.

The corks are available in 3 sizes (S, M and L) It should be printed in TPU 95A with 0.2mm layer height and 0.4mm width. The M size is designed around French wine bottles (18.5 mm openings) but its geometry is adequat for a large variation of diameters. You may only ever need M size. However S and L sizes can be more adequate for openings below 17.5 or higher than 19mm.

The TPU cork and the figurine handle should be printed apart and simply screwed together. It is designed to be a tight fit but TPU 95A can accommodate it and it results in a strong junction.

Category: Scans & Replicas