Reverse Rambo Mount for BEAR Frame

The RamBo Box, cover, and cable clamps are included, you will need to print all three to make a complete inclosure of the Reverse RamBO mount.  Also I have included an experimental template to print first is you want to have a reduced amount of overhangs while printing the model.  This model requires your original mounting screws included with the BEAR upgrade to mount the circuit board and (4) M3x8; (6) M3x12,  (5) M3x20 screws; (4) M3 Hex nuts, and (11) M3 square nuts. 

I modified the Zaribo mount for the RamBo boards to work on the BEAR upgrade v2.1 frames  It works with the mini RamBo or the Ensi RamBo boards and has a space to feed the MMU cable thru as well.