CFMOTO 650 MT / Adventura Garmin ZUMO XT GPS Mount

CFMOTO 650 Adventura / MT Garmin ZUMO XT GPS Mount

I drew this up in AutoCad and SendCutSend laser cut this file out of ¼" thick 6061-T6 aluminum, I then cut out my washers, deburred, primed and texture painted. 

From my seat height and seating position on my motorcycle I can see over my tank bag, see the GPS, and speedo.

In the aluminum version the standoff washers (spacers-see pics) were included in the original part and cut out on my table-jig-saw (see pic). These 2 washers are stacked to ½" tall and placed in the triple clamp to make sure the contact pressure is in the correct spot when the longer bolts are used (see pic).

I used a black wrinkle paint after priming. GPS mount works very well now. Feel free to modify for your own use.

Both bolt hole geometries are on this mount for mounting your Zumo XT vertical or horizontal. 

https://www.garmin.com/en-US/p/679804/

https://sendcutsend.com/

If I were to 3D print these, I would use PCTG or ASA. I have included PCTG code below.