Gimble Protector. Hoverair X1 ProMax

This is a replacement for the original gimble protector which I decided was too large, too cumbersome and a distraction.

Mk2 is minimalist but affords the same level of protection and movement stability. It remains within the footprint of the Hoverair ProMax and is easily removed by flexing the side arms of the cover (see video)

Made from 83 shore soft TPE rubber. BGcode for Mk4 and Mk3 provided plus STL.

Prints from face down. Requires enforced support for the cavities in the side arms (for the edges of the lens support)

See here for the pocket protector for the original HoverAir X1

HoverAir X1 Pocket Protector by Rosti | Download free STL model | Printables.com