Office Status Wheel Mk2

If you liked, don't forgot to drop a like!

Second edition of the office wheel status indicator. This is an improvement from my first model as it includes a locking mechanism, better fitting pieces, smoother rotation, NO DUCT TAPE OR GLUE REQUIRED!  This is better than the ones on amazon, since you can change what the text says, make cool designs etc. The text example I used is “Out of Office, Busy, Available, Working from Home”. Customize the text as desired!

Changes from V1:

• Added locking center mechanism. 
• Changed the profile of the base piece so the center piece would not get stuck.
• Changed the geometry of the text pieces slightly to ensure friction fits.
• Some people were having issues doing multi-material prints, added inset text option. (This option will require glue)

Note if printing:

• NO NEED TO REPRINT CENTER PIECE. First edition and second edition centerpiece/inside are the same.
• Not print in place.
• For multi-color / multi-material prints, make sure they adhere well to each other. If not you could use washable glue stick to ensure adhesion. Apply glue to surface of the layer before the filament switch. I use the purple Elmer's washable glue sticks. They worked well on PLA + PETG.