The face mask sun visor clip is used to stop the mess of all the face masks you have laying around in your car. Therefore we designed a clip you can clamp to your sun visor in order to hang there all types of masks. If you have a regular face mask, or an ffp2-mask - no problem, you are going to find a way to stick it to your sun visor.

How to print it?

fist measure the thickness of your sun visor. In the attached .stl you can find three versions of the clip for different thicknesses of the sun visor.

up to 20mm
up to 25mm
up to 30mm

Choose your version and start slicing! Please consider following hints:

For printing we recommend 0.2mm quality standard settings in Prusa slicer with 20% infill. If you want a more robust version simply increase the number of perimeters. This leads to a higher stiffness compared to more infill. Use full support to get a smoothly working click mechanism.
As Material we recommend to use ASA or ABS , because our experience shows that the temperatures in the car are getting up to 70°C. If you use PLA or PETG, the forces applied by the masks can lead to massiv deformations of the clip.
see in below picture how to organize the parts in the slicer to have easiest printing setup!