Hue Forge - Welsh Corgi Cardigan

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 159.61x250mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

Filaments Used:

PLA Jayo Black Matte
PLA Jayo Grey Matte
PLA Prusament  Marble Grey
PLA Nebula Pure White
This print uses 4 unique filaments

Swap Instructions:

Start with Black
At layer #15 (1.28mm) swap to Grey
At layer #20 (1.68mm) swap to Marble
At layer #26 (2.16mm) swap to White for the rest.