Remix: Mini Flip Moon Fidget Toy

Ok, guys, you need to read this carefully.

I wanted to have a mini version and first I thought that it's just scaling to 50% but the tabs of the flips don't fit like that. So rebuild it was! I also wanted it to be more compact so I chopped the knobs. Wheel parts are a bit loose and I did mean it that way. If you don't want it that way, you will have to change the parts yourself.

Print flips with 0.15mm layer height and 3 layers so 0,45mm thickness! 

My flips can handle use suprisingly well, haven't broken any of these yet. they're printed with cheapest PLA I got. Other than flips I have 0.2mm layer height and everything has 3 perimeters, 40% infill, I don't remember how many tops and bottoms.. oh and all top layers only one perimeter.

When you stack parts in slicer, I don't know how other products work, but in PrusaSlicer changing the order of parts will change what color will be printed ontop of what else. There is places where there is who colors in the same place and order will tell what is printed. The last one if you didn't know.

As I printed these with my PrusaXL I didn't do anything to printed parts, just assembled them. I put a tiny bit of glue on the end of shaft and pushed the knob in. 

Parts and other files are pretty much explained in the name or at least in the file note.

I propably forgot half I wanted to say, but ask if something's not clear!

Print, assemble and flip-flip-flip-flip-flip!

Changing the size to 50% wasn't so easy, so alot of scaling of the parts and exhausting rebuild of the flips with smaller tabs.