Modern Cylindrical Vase with Wavy Relief (vase mode)

This modern vase, with its cylindrical shape and refined wave pattern, is a true showpiece. The diagonal wavy texture creates a subtle play of light that gives the vase a graceful appearance. Place the vase as a characterful accent on a side table or in a wall cabinet to add a warm, elegant touch to your interior. The wide base and narrow neck make it particularly suitable for elongated flowers or dried flowers and ensure stability on any surface.

Specifications

Dimensions: 11,3 x 9,1 x 20 cm (oval)
Print time: 2 - 4 hours 
Resizable: yes, in your slicer. 
3D Model type: SOLID body (not hollow inside, specifically designed for vase mode) 
Printing technique: FDM / FFF-only 
File type: STL (PDF with download link)
Recommended materials: PLA, PETG 
Recommended slicer: Prusaslicer, Cura, Simplify3D 
Print difficulty: easy

Recommended nozzle diameter and print settings 
For sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill.

Slicer setting: vase mode / spiralize outer contours ENABLED 
Nozzle diameter: 0.8mm, 1mm, or larger 
Bottom layers: 8 
Perimeter speed range: 15 - 30 mm/s
Layer height range: 0.1 mm - 0.6 mm  
Extrusion width / wall thickness range: 1mm, 1.2mm or 1.4mm+ 
Watertight?: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion.

License info: PERSONAL USE ONLY, unless you have a commercial license (soon available for purchase).

Note: these are real photos of my test print that I made with a DSLR and a studio light (these are not renders / AI). Filament I used is SILK PLA.