V10 ENGINE BLOCK

V10 Engine Block - 3D Printable Model

Description:
This is a detailed 3D model of a V10 engine block, ideal for educational purposes, mechanical displays, or scale modeling. The design showcases realistic structural elements, including the cylinder arrangement and external geometry typical of V-type engines.

Printing Recommendations:

Printer Type: Resin (SLA/DLP) or FDM with fine nozzle

Layer Height: 0.1 – 0.2 mm (recommended 0.12 mm for best balance between detail and speed)

Infill: 20–30% (can be adjusted based on strength needs)

Supports: Required, especially under overhangs and internal features

Print Orientation: Upright or angled to reduce support inside cylinder bores

Material: Standard resin, PLA, or ABS (resin recommended for best detail)

Post-Processing:
For resin prints, proper UV curing and light sanding may enhance the surface finish. For FDM prints, light sanding and priming can bring out finer details.

Let your imagination rev with this miniature engine model!