Camera+ Disposable Lens Adapter - 2BitToy

If you have a disposable camera laying around or can get a free one from your local film development shop, 

1. Gently take it apart and remove the lens
2. Trim the plastic lip on the rear side of the lens to fit it into the print
3. Placing the print “threads to the sky," press the lens into the print. Having a flat surface will help!
4. Enjoyyy :)

UPDATE: 

…

FEEDBACK:

If there are specific issues with the model, please DM me on Printables or Instagram so I can update the model for everyone!

I bulked up the Camera+ dust cap and punched a big hole in it! :)