Makita BL0715 battery replacement plastic cover

Replacement plastic cover for Makita BL0715 battery.

The included STL files are pre-oriented for optimal print results.
Supports are required for proper printing.

I had adhesion issues with the lock_1 and lock_2 parts, so I recommend printing them with a brim.

Make sure to install lock_1 and lock_2 from the correct side of the body part — their protrusions should be on the opposite side of the protrusions on the body, as shown in the reference image.

The parts are assembled using four M3x12 countersunk screws.

For improved strength and durability, I recommend printing in polycarbonate or another tough filament.