Fauxké Ball shell for HyperX Saga / Saga Pro - no MMU needed
Descrizione
PDFYour creature friend will take a good peek at you holding this Fauxké Ball shell for for the HyperX Saga / Saga Pro.
Suggested Print Settings
- Filament: PLA
- Perimeters: 2
- Layer height: 0.15mm
- Top and bottom layers: 5
- Infill: 15% gyroid
No MMU is needed. Just add the colour changes or use the gcode files (for Prusament PLA), which already have them. If you do it yourself, the model files are already correctly orientated, just insert the colour changes at these heights (with 0.15mm layer heights):
| Rear: white, black, red | 51.80, 57.05 |
| Side button: black: white | 3.50 |
| Button covers: white, black, red | 21.95, 27.20 |
| Disc: white, black | 0.80 |
The only other thing to print is the “fronts” (front button and front chassis) in red.
Glue the center part in with some Super Glue. Just a little squirt’ll do the job.
2025-07-07 added alternate front for the cabled version of the mouse.
Tags
Origine modello
L'autore ha remixato questo modello.
Differenze del remix rispetto all'originale
Mouse Body 1 modified to create inset stripe and recess for center part, other parts unmodified.