Picture frame

This is simple picture frame with stand. The connection between the front part and the rear part is press-fit.

Originally the frame was created for a picture height / width: 105 mm / 150 mm (PictureFrameFront.stl, PictureFrameSupport.stl). After latest update there are variants for standard metric / imperial size and for wall mounting.

I printed the frame with Prusament PETG Prusa Galaxy Black - it looks quite nice.

Print settings:

• Layer height: 0.2 mm
• Perimeters: 4
• Solid layers - top/bottom: 5 / 5
• Infill: 15%
• Supports: No

Landscape variants:

Picture height / width: 100 mm / 150 mm
PictureFrameFront-100-150.stl
PictureFrameSupport-100-150.stl (free-standing)
PictureFrameWall-100-150.stl (wall mounting)

Picture height / width: 4" / 6" (101.6 mm / 152.4 mm)
PictureFrameFront-4-6.stl
PictureFrameSupport-4-6.stl (free-standing)
PictureFrameWall-4-6.stl (wall mounting)

Portrait variants:

Picture height / width: 150 mm / 100 mm
PictureFrameFront-150-100.stl
PictureFrameSupport-150-100.stl (free-standing)
PictureFrameWall-150-100.stl (wall mounting)

Picture height / width: 6" / 4" (152.4 mm / 101.6 mm)
PictureFrameFront-6-5.stl
PictureFrameSupport-6-4.stl (free-standing)
PictureFrameWall-6-4.stl (wall mounting)

Screw size for wall mounting: diameter ~2 mm / head diameter 5 mm.