Goku SSJ4 - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 96x170mm in size

Filaments Used:
PLA+ Sunlu Black 
PLA Sunlu Matte Red  
PLA Anycubic Vibrant Yellow 
PLA+ Sunlu White
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Vibrant Yellow
At layer #18 (1.52mm) swap to White for the rest.

Frame Version:
At layer #23 (1.92mm) swap to Red for the rest.