A Soldier's Heart - Hueforge

A Soldier's Heart - Hueforge - The toughest among us can also have the biggest heart

Sized so you can print the frame on a standard sized printer. See frame recommendation below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 146.67x220mm in size

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Dark Grey Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Dark Grey
At layer #12 (1.04mm) swap to Steel Grey
At layer #17 (1.44mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.

I recommend this frame: https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings 

It's a great design and you can set it for any size hueforge print you want. You can use the free version of Fusion360 to create new sizes easily, don't be afraid to try it out even if you've never used Fusion360 before. Pay attention to proper orientation of the nail hanger slot on the frame.

Enjoy!