Seestar S50 | Accessories Box

Accessories Box for the kit of utils create by Lordwhiteley!

Seestar Accessories Set: https://www.thingiverse.com/thing:6752376
This is one of the best accessories kit  available for the Seestar S50, period!

The dew filter is a bit wider, the diffraction caps are a bit bigger, and the filter support mechanism is simple and effective. Awesome kit.

So, i needed a box to save it and keep everything organized and clean.

3 (the bigger ones) of the box placeholders can be used either for 3 filter box's or to fit the 3 parts of the kit meant for supporting the filter. For this, you must print the box with TPU, ideally with 15% infill. The box cover should be printed with TPU 15% infill as well. 

My print setting:

• Elegoo Neptune 4
• TPU 15% Gyroid Infill | Normal settings | 0.15mm layers (can go to 0.25mm)
• 230º Nozzle | 50º Bed
• 50mm/s Initial layers | 80mm/s print
• Cooling @ 40%
• No supports
   

– @COSMONUTZ INSTAGRAM --