Grundig Audiorama 4000 / 5000 Speakers - Stand Screw

Grunding Audiorama 4000's stand has a plastic screw to connect to the bottomplate. 
Over time they will break.

This is a replace part made by Zoomzoom999 on thingiverse, and he made my day ;)
I printed it with 100% infill and auto painted supports

OG text:

Hey guys !
I broke the screw of one of my Grunding Audiorama 4000's stand.

It's impossible to find spare parts for those old loudspeakers so I made it myself.

I've set a 70-80% of infill, I advise you to try both depending of your printer and then to test it's solidity once screwed in the stand.

Important tips ! I used some insulating tape as a joint on the base of the screw, there might be some spare space between the base of the screw and the base of the stand.

If you don't use tape, the pole might be a very little free of move.

Once it's screwed and taped, try to move the pole of your stand a little bit, if the pole doesn't move, it means that there is enough tape and if you don't hear any crackling noises, it must be alright.

I've proceeded this way and so far, my stand is still standing :)