Gratkit Firefly Filament Dryer mount for 2020 Extrusion (XL, Voron, etc)

BOM

• Gratkit Filament Dryer
• 2x M4x100mm Socket Head Cap bolts
• 2x M4x40mm Socket Head Cap bolts for the brace, optional

The drybox will fit snug into the base part.  Brace is optional and probably not necessary.  It can be used if you have a vertical extrusion underneath the part to help support it, but in my experience the base itself is plenty rigid when properly mounted and it doesn't wind up resting on the brace at all.