Graded Card Stand (PSA and CollectAura)

Designed to fit standard PSA and CollectAura graded card cases with sleeves (don't know if it works without), this model allows your collectible cards to spin smoothly on display – perfect for desks, shelves, or display cabinets.

There is 2 versions for the bottom , one where you can include a 608 bearing to mount the base and make it spin smoothly , the other one is fixed if you already have a turntable .

I have only tested the bearing version with 2 level , don't know if it still works great with more.

The top part is required regardless how many levels you intend to print 

What you will need :

-Bottom (with or without bearing)

-Base (only if you print the version with bearing)

-608 bearing (only for the version with bearing)

-Top

-Junction (if you want to add a level , you can add multiple)

Printing :

Recommended layer height: 0.2 mm

Support needed only for the junction

Infill: 20% is sufficient

Orientation: As shown in the photos

Hope you like it :)