call of duty hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.55x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #19 (1.6mm) swap to Ivory White for the rest.